We stabilize We stabilize
tehnologii de injectare cu rasini
ANCHORING OF RETAINING WALLS AND STOPPING LANDSLIDES
Installing anchors and injecting with resins using the GEOPUR® system is an excellent solution applied in the case of destabilized retaining walls, as well as in the case of stopping landslides.
The anchoring of retaining walls and stabilizing slopes is done using self-drilling rods and the injection of GEOPUR® polyurethane resin. The bearing capacity of the anchors injected with GEOPUR® material varies depending on the geological context and the type of technical solution chosen.
ANCHORING OF RETAINING WALLS AND STOPPING LANDSLIDES
Installing anchors and injecting with resins using the GEOPUR® system is an excellent solution applied in the case of destabilized retaining walls, as well as in the case of stopping landslides.
The anchoring of retaining walls and stabilizing slopes is done using self-drilling rods and the injection of GEOPUR® polyurethane resin. The bearing capacity of the anchors injected with GEOPUR® material varies depending on the geological context and the type of technical solution chosen.
The advantages of using this technology:
– Quick execution
– No drilling operations are required prior to injection works; we use a single type of drilling and injection rods (type R)
– Anchors can be loaded immediately after the drilling and injection operation are finalised (maximum load-bearing capacity is reached after 24 hours)
– The injection and drilling equipment has good mobility and reduced weight
The advantages of using this technology:
– Quick execution
– No drilling operations are required prior to injection works; we use a single type of drilling and injection rods (type R)
– Anchors can be loaded immediately after the drilling and injection operation are finalised (maximum load-bearing capacity is reached after 24 hours)
– The injection and drilling equipment has good mobility and reduced weight
Basic parameters of type R anchors
| Anchor Type | R25 | R32N | R38 | R51 | |
|---|---|---|---|---|---|
|
Exterior/Interior Diameter |
mm |
25/14 |
32/18.5 |
38/12 |
51/12 |
|
Bearing Capacity |
kN |
200 |
280 |
500 |
550 |
|
Weight |
kg/m |
2,3 |
3,4 |
6,0 |
7,0 |
Design Sketches:
Basic parameters of type R anchors
| Anchor Type | R25 | R32N | R38 | R51 | |
|---|---|---|---|---|---|
|
Exterior/Interior Diameter |
mm |
25/14 |
32/18.5 |
38/12 |
51/12 |
|
Bearing Capacity |
kN |
200 |
280 |
500 |
550 |
|
Weight |
kg/m |
2,3 |
3,4 |
6,0 |
7,0 |
